Call us at +853 6677 4770

Our Product Detail

Welcome to our website!


rosewood laminate flooring rosewood planks

rosewood laminate flooring rosewood planks

Products Details

This is the description of rosewood laminate flooring rosewood planks

Product Type:

Extra Large Size



Product Number:





1450 mm *135 mm *12mm

Foundation installed:

Formaldehyde emission


< 0.01PPM

Floor Heating:



Live Natural oil – Matt color

Installation Labor Cost:

6m2 /hour(2 Labor)


Classic Elegance

Water resistance:


0 defect after 48 hours soaking



Q:Will EWAN flooring be difficult to install?

A:This is absolutely the product with the easiest installation methods, lowest labor cost, and 0 extra accessories or material to accompany with. The engineering team just need to cut into the right dimension and install like puzzles.  You can please contact our Sales team to understand better about the methods. Click here for short videos. 




QHow EWAN Modified Wood defeat the humidity and heat?

A: Wood is a natural hygroscopic material that can absorb and release moisture. The moisture level of wood adapts continuously to the respective environment. Phenomena such as gaps, warping and cracks may typically occur in a moderate form amongst these conditions. We modified the basement of the flooring bar into a water-proof and non- expansion and remain the natural wood on the top.

EWAN products overcome all the possible issues that can happen with a hard wood by their exclusive patented technology and guarantee minimum 20 years of users’ applications.


Q: EWAN Modified Wood works with UNDERFLOOR HEATING?

A:  We modified the basement of the flooring bar into a water-proof and non- expansion and remain the natural wood on the top. The modified type of wood material of EWAN products can perfectly deliver the heat from the system to indoor without high consumption of energy. It is important therefore to ensure the right room climate is achieved but at the same time without a higher energy consumption than other materials and the modified wood material is the only solutions for it. This means that you will have a permanently stable floor under your feet.


Q: Cleaning?

A:  Different from other materials that required daily cleaning should be carried out dry with a broom or vacuum cleaner, EWAN products can be cleaned with web mob, clothes, and resistant with food, dirt, creams which can be removed easily.

Q: Technical Supports

A:  EWAN service team will provide training material to all the importers of our products which guide them to install our products properly. Furthermore, the video manual will be always available. We have International service team from the factory to be sent on site. R & D is open to receive any further opinions from our customers to make our products more suitable for their specific applications.



A:  Despite of the fact that there will be a minimum tolerant consumption during installation that is agreed by the EWAN and our customers, any further defective due to quality of the products will be replaced one-to-one from EWAN. We oblige to fulfill a complete responsibility to the cargo dispatched from EWAN factory.




engineered oak flooring
engineered oak flooring
prefinished solid hardwood flooring
prefinished solid hardwood flooring
engineered oak flooring    prefinished solid hardwood flooring
engineered oak flooring prefinished solid hardwood flooring

Engineered oak flooring Manufacturers tell you about the maintenance of sheet metal furniture
1. Ground Leveling: Place the furniture on the ground must be kept flat, four legs balanced and balanced, avoid placing uneven ground. If the furniture is placed in the state of frequent swinging instability, the inevitable over time will make the tenon or fastener off, the bond part cracked, thus affecting the use of effects and reduce the life of furniture. In addition, some loose ground is not appropriate. Some people are accustomed to using wood or iron pads under one leg of the furniture, to correct the disadvantages of uneven ground, seek to put a smooth, this practice is also defective. Even if the pad is flat, due to imbalance caused by stress, over time will undermine the internal structure of furniture. The only way to compensate is to trim the floor or use a slightly larger area of ​​hard rubber sheeting to the south to allow the furniture to stabilize on all four legs.
2. Knot net dust: cotton knit cloth wipe furniture dust, and then fine wool brush to remove the sunken or embossed decorative dust. After paint treatment of furniture, avoid using gasoline or organic solvents to wipe, colorless furniture wax polish can be used to enhance the gloss and reduce dust fall.
3. Away from the sun: Furniture placed in the best position to avoid direct sunlight outside the window, often the sun will paint fade furniture, metal parts easily oxidized metamorphosis, wood easily brittle. Summer is best to cover the sun with curtains to protect the furniture.
4. isolated damp: the floor of residential buildings often due to indoor damp furniture damaged. Summer humidifier should be limited to prevent excessive humidity and damage to furniture, such as wood decay, corrosion of metal parts, easy to open the adhesive bond and so on. Cleaning furniture as usual to minimize the use of water, but avoid the use of alkaline water, should only be wiped with a damp water wipe clean cloth, and then wipe clean with a dry cloth.
Looking forward to your inquiry for this engineered oak flooring