Call us at +853 6677 4770

Our Product Detail

Welcome to our website!


bamboo laminate engineered oak flooring

Wood flooring used in floor heating Sapele -1350 Regular-Sapele Selected quality Sapele wood from the stable sourcing with extremely quality control on the patents.   EWAN selected best quality Sapele woods applied to Musical instruments to our flooring.  Wood contains natural variations in color, tone, and grain that are difficult to reflect on brochures and screens. Moreover, computer monitors have different color settings which generate color variation. Therefore, room scenes designed and viewed online may vary in appearance from the batch in which  your purchase will originate.

Products Details

This is the description of bamboo laminate engineered oak flooring


Product Type:

Standard Size



Product Number:





1350 mm *120 mm *10mm

Foundation installed:

Formaldehyde emission


< 0.01PPM

Floor Heating:



Live Natural oil – Glossy color

Installation Labor Cost:

6m2 /hour(2 Labor)


Classic Elegance

Water resistance:


0 defect after 48 hours soaking



Q:Will EWAN flooring be difficult to install?

A:This is absolutely the product with the easiest installation methods, lowest labor cost, and 0 extra accessories or material to accompany with. The engineering team just need to cut into the right dimension and install like puzzles.  You can please contact our Sales team to understand better about the methods. Click here for short videos. 



QHow EWAN Modified Wood defeat the humidity and heat?

A: Wood is a natural hygroscopic material that can absorb and release moisture. The moisture level of wood adapts continuously to the respective environment. Phenomena such as gaps, warping and cracks may typically occur in a moderate form amongst these conditions. We modified the basement of the flooring bar into a water-proof and non- expansion and remain the natural wood on the top.

EWAN products overcome all the possible issues that can happen with a hard wood by their exclusive patented technology and guarantee minimum 20 years of users’ applications.


Q: EWAN Modified Wood works with UNDERFLOOR HEATING?

A:  We modified the basement of the flooring bar into a water-proof and non- expansion and remain the natural wood on the top. The modified type of wood material of EWAN products can perfectly deliver the heat from the system to indoor without high consumption of energy. It is important therefore to ensure the right room climate is achieved but at the same time without a higher energy consumption than other materials and the modified wood material is the only solutions for it. This means that you will have a permanently stable floor under your feet.


Q: Cleaning?

A:  Different from other materials that required daily cleaning should be carried out dry with a broom or vacuum cleaner, EWAN products can be cleaned with web mob, clothes, and resistant with food, dirt, creams which can be removed easily.

Q: Technical Supports

A:  EWAN service team will provide training material to all the importers of our products which guide them to install our products properly. Furthermore, the video manual will be always available. We have International service team from the factory to be sent on site. R & D is open to receive any further opinions from our customers to make our products more suitable for their specific applications.



A:  Despite of the fact that there will be a minimum tolerant consumption during installation that is agreed by the EWAN and our customers, any further defective due to quality of the products will be replaced one-to-one from EWAN. We oblige to fulfill a complete responsibility to the cargo dispatched from EWAN factory.


bamboo laminate
bamboo laminate
engineered oak flooring
engineered oak flooring
bamboo laminate   engineered oak flooring
bamboo laminate engineered oak flooring

What kind of wood flooring is suitable for geothermal environment?
Mainly to see the specific technical parameters, such as environmental protection, thermal conductivity, heat resistance, stability and so on.
Formaldehyde: The higher the temperature is, the easier it is to release formaldehyde. A good wooden floor requires that the amount of formaldehyde released does not exceed the standard in the condition of prolonged heating. In the choice of floor heating, we must choose the floor with low formaldehyde content as possible, because the higher the temperature, the more formaldehyde emission, the specific standards can choose domestic E0 level.
Or European standard E1 level, formaldehyde emission ≤ 0.5mg/L.
Stability: In fact, the stability is the most important in all sides. Before there were many owners who responded to the home shop's solid wood flooring, cracking did not occur in two years. In fact, one of the main reasons is the nature of the floor itself, and the other is the control of indoor temperature and humidity.
From the floor itself, the stability is divided into material, structure and lock.
Among them, the quality of the base material selected for the floor is good, and the fine base material is fine. The main ones are spruce and Pinus sylvestris. The structure mainly consists of the surface plate, the substrate, and the bottom plate. The quality of the three materials affects the floor. Stability, in the aspect of the lock, for the flat buckle floor, the stability is worse than the lock floor, the main lock has 5G lock, step double lock and so on.
Mats: Under geothermal environment, the requirements for floor mats are also very high. Commonly used aluminum film mats are not recommended, and they all have defects in heat conduction and heat dissipation.
Thickness: The thickness of the floor will affect the thermal conductivity. It is recommended to increase the thickness of the floor by 7-8mm. For solid wood composite floor, the floor thickness is 11mm-15mm. It is not recommended to use solid wood floors in the geothermal environment.
Looking forward to your inquiry for this bamboo laminate engineered oak flooring