Engineered oak flooring Supplier's recommendations for wood flooring
The processing precision must reach the national standard; the substrate defect value requires straight edges, no burrs, cracks, wormholes, etc.; the surface paint quality, the surface paint lacquer is required to be smooth, no blisters, folds and so on. Specific selection of available caliper measurement in the middle and both sides are the same, and then use 5-8 block floor together, view the joint after the joint whether the seam, flush, with or without height difference and length difference. The moisture content is the most critical indicator and it is required to be between 8-13%. Excessively high and low moisture content can cause warping or cracking due to environmental changes after paving the wooden floor. Due to the characteristics of wood itself, in addition to his many advantages, its main drawback is that it swells with water and is greatly affected by the environment. The wood floor itself is only a semi-finished product, and it can only be regarded as a real product after the paving is completed. Therefore, the paving of the solid wood floor is very important. If it is inadvertent, cracking and arching will occur. Most of the quality problems of wooden floors are due to improper decoration. There are two kinds of wood floor surface leaching paint and plain board, lacquer floor laying can be waxed on the cracks, after the prime plate is laid, need to be planed, polished, and then scraped transparent putty twice, brush paint twice, many people think Solid wood floor is very squeamish, not easy to maintain, in fact, this is a misunderstanding. The newly-paved floor should be waxed and sealed within one month. Afterwards, it can be waxed or painted according to the actual situation for six months to one year.
Looking forward to your inquiry for this engineered oak flooring inexpensive wood flooring